Archive for the ‘Ponderings’ Category

Tariffs in a Nutshell

Wednesday, July 18th, 2018

I was asked to distill a previous post about tariffs into something more accessible to the general public. The resulting article ended up being run on CNN Digital as an opinion piece:

In retaliation for unfair trade practices and the theft of American innovations and ideas, the US Trade Representative’s office is imposing a 25% tariff on a broad range of goods imported from China.

But these tariffs won’t help American workers. Instead, they will encourage American companies to push ideas and production overseas by raising the cost of raw materials without penalizing the import of finished goods.
[…]
Imagine a bakery located in the US. It uses imported flour, sugar and cacao to make delectable cakes based on a closely-guarded secret family recipe handed down for generations, and it employs dozens of bakers to do this. Now suppose a bakery in China has tried to copy the recipe…

The article uses a bakery as an analogy to explain the trade war situation, as well as thinking through why trade deficits are OK through the notion that buying a T-shirt at a store creates a “trade deficit” between you and the store, but in the end that trade deficit is actually quite helpful to you. You can read the full article on CNN Digital.

I had also prepared a short infographic to accompany the article, which wasn’t picked up by CNN, but you can enjoy it here.

New US Tariffs are Anti-Maker and Will Encourage Offshoring

Tuesday, June 19th, 2018

The new 25% tariffs announced by the USTR, set to go into effect on July 6th, are decidedly anti-Maker and ironically pro-offshoring. I’ve examined the tariff lists (List 1 and List 2), and it taxes the import of basic components, tools and sub-assemblies, while giving fully assembled goods a free pass. The USTR’s press release is careful to mention that the tariffs “do not include goods commonly purchased by American consumers such as cellular telephones or televisions.”

Think about it – big companies with the resources to organize thousands of overseas workers making TVs and cell phones will have their outsourced supply chains protected, but small companies that still assemble valuable goods from basic parts inside the US are about to see significant cost increases. Worse yet educators, already forced to work with a shoe-string budget, are going to return from their summer recess to find that basic parts, tools and components for use in the classroom are now significantly more expensive.


Above: The Adafruit MetroX Classic Kit is representative of a typical electronics education kit. Items marked with an “X” in the above image are potentially impacted by the new USTR tariffs.

New Tariffs Reward Offshoring, Encourage IP Flight

Some of the most compelling jobs to bring back to the US are the so-called “last screw” system integration operations. These often involve the complex and precise process of integrating simple sub-assemblies into high-value goods such as 3D printers or cell phones. Quality control and IP protection are paramount. I often advise startups to consider putting their system integration operations in the US because difficult-to-protect intellectual property, such as firmware, never has to be exported if the firmware upload operation happens in the US. The ability to leverage China for low-value subassemblies opens more headroom to create high-value jobs in the US, improving the overall competitiveness of American companies.

Unfortunately, the structure of the new tariffs are exactly the opposite of what you would expect to bring those jobs back to the US. Stiff new taxes on simple components, sub-assemblies, and tools like soldering irons contrasted against a lack of taxation on finished goods pushes business owners to send these “last screw” operation overseas. Basically, with these new tariffs the more value-add sent outside the borders of the US, the more profitable a business will be. Not even concerns over IP security could overcome a 25% increase in base costs and keep operations in the US.

It seems the intention of the new tariff structure was to minimize the immediate pain that voters would feel in the upcoming mid-terms by waiving taxes on finished goods. Unfortunately, the reality is it gives small businesses that were once considering setting up shop in the US a solid reason to look off-shore, while rewarding large corporations for heavy investments in overseas operations.

New Tariffs Hurt Educators and Makers

Learning how to blink a light is the de-facto introduction to electronics. This project is often done with the help of a circuit board, such as a Microbit or Chibi Chip, and a type of light known as an LED. Unfortunately, both of those items – simple circuit boards and LEDs – are about to get 25% more expensive with the new tariffs, along with other Maker and educator staples such as capacitors, resistors, soldering irons, and oscilloscopes. The impact of this cost hike will be felt throughout the industry, but most sharply by educators, especially those serving under-funded school districts.


Above: Learning to blink a light is the de-facto introduction to electronics, and it typically involves a circuit board and an LED, like those pictured above.

Somewhere on the Pacific Ocean right now floats a container of goods for ed-tech startup Chibitronics. The goods are slated primarily for educators and Makers that are stocking up for the fall semester. It will arrive in the US the second week of July, and will likely be greeted by a heavy import tax. I know this because I’m directly involved in the startup’s operations. Chibitronics’ core mission is to serve the educator market, and as part of that we routinely offered deep discounts on bulk products for educators and school systems. Now, thanks to the new tariffs on the basic components that educators rely upon to teach electronics, we are less able to fulfill our mission.

A 25% jump in base costs forces us to choose between immediate price increases or cutting the salaries of our American employees who support the educators. These new tariffs are a tax on America’s future – it deprives some of the most vulnerable groups of access to technology education, making future American workers less competitive on the global stage.


Above: Educator-oriented learning kits like the Chibitronics “Love to Code” are slated for price increases this fall due to the new tariffs.

Protectionism is Bad for Technological Leadership

Recently, I was sent photos by Hernandi Krammes of a network card that was manufactured in Brazil around 1992. One of the most striking features of the card was how retro it looked – straight out of the 80’s, a full decade behind its time. This is a result of Brazil’s policy of protectionist tariffs on the import of high-tech components. While stiff tariffs on the import of microchips drove investment in local chip companies, trade barriers meant the local companies didn’t have to be as competitive. With less incentive to re-invest or upgrade, local technology fell behind the curve, leading ultimately to anachronisms like the Brazilian Ethernet card pictured below.


Above: this Brazilian network card from 1992 features design techniques from the early 80’s. It is large and clunky compared to contemporaneous cards.

Significantly, it’s not that the Brazilian engineers were any less clever than their Western counterparts: they displayed considerable ingenuity getting a network card to work at all using primarily domestically-produced components. The tragedy is instead of using their brainpower to create industry-leading technology, most of their effort went into playing catch-up with the rest of the world. By the time protectionist policies were repealed in Brazil, the local industry was too far behind to effectively compete on a global scale.

Should the US follow Brazil’s protectionist stance on trade, it’s conceivable that some day I might be remarking on the quaintness of American network cards compared to their more advanced Chinese or European counterparts. Trade barriers don’t make a country more competitive – in fact, quite the opposite. In a competition of ideas, you want to start with the best tech available anywhere; otherwise, you’re still jogging to the starting line while the competition has already finished their first lap.

Stand Up and Be Heard

There is a sliver of good news in all of this for American Makers. The list of commodities targeted in the trade war is not yet complete. The “List 2” items – which include all manner of microchips, motors, and plastics (such as 3D printer PLA filament and acrylic sheets for laser cutting) that are building blocks for small businesses and Makers – have yet to be ratified. The USTR website has indicated in the coming weeks they will disclose a process for public review and comment. Once this process is made transparent – whether you are a small business owner or the parent of a child with technical aspirations – I encourage you to please share your stories and concerns on how you will be negatively impacted by these additional tariffs.

Some of the List 2 items still under review include:

9030.31.00 Multimeters for measuring or checking electrical voltage, current, resistance or power, without a recording device
8541.10.00 Diodes, other than photosensitive or light-emitting diodes
8541.40.60 Diodes for semiconductor devices, other than light-emitting diodes, nesoi
8542.31.00 Electronic integrated circuits: processors and controllers
8542.32.00 Electronic integrated circuits: memories
8542.33.00 Electronic integrated circuits: amplifiers
8542.39.00 Electronic integrated circuits: other
8542.90.00 Parts of electronic integrated circuits and microassemblies
8501.10.20 Electric motors of an output of under 18.65 W, synchronous, valued not over $4 each
8501.10.60 Electric motors of an output of 18.65 W or more but not exceeding 37.5 W
8501.31.40 DC motors, nesoi, of an output exceeding 74.6 W but not exceeding 735 W
8544.49.10 Insulated electric conductors of a kind used for telecommunications, for a voltage not exceeding 80 V, not fitted with connectors
8544.49.20 Insulated electric conductors nesoi, for a voltage not exceeding 80 V, not fitted with connectors
3920.59.80 Plates, sheets, film, etc, noncellular, not reinforced, laminated, combined, of other acrylic polymers, nesoi
3916.90.30 Monafilament nesoi, of plastics, excluding ethylene, vinyl chloride and acrylic polymers

Here’s some of the “List 1” items that are set to become 25% more expensive to import from China, come July 6th:

Staples used by every Maker or electronics educator:

8515.11.00 Electric soldering irons and guns
8506.50.00 Lithium primary cells and primary batteries
8506.60.00 Air-zinc primary cells and primary batteries
9030.20.05 Oscilloscopes and oscillographs, specially designed for telecommunications
9030.33.34 Resistance measuring instruments
9030.33.38 Other instruments and apparatus, nesoi, for measuring or checking electrical voltage, current, resistance or power, without a recording device
9030.39.01 Instruments and apparatus, nesoi, for measuring or checking

Circuit assemblies (like Microbit, Chibi Chip, Arduino):

8543.90.68 Printed circuit assemblies of electrical machines and apparatus, having individual functions, nesoi
9030.90.68 Printed circuit assemblies, NESOI

Basic electronic components:

8532.21.00 Tantalum fixed capacitors
8532.22.00 Aluminum electrolytic fixed capacitors
8532.23.00 Ceramic dielectric fixed capacitors, single layer
8532.24.00 Ceramic dielectric fixed capacitors, multilayer
8532.25.00 Dielectric fixed capacitors of paper or plastics
8532.29.00 Fixed electrical capacitors, nesoi
8532.30.00 Variable or adjustable (pre-set) electrical capacitors
8532.90.00 Parts of electrical capacitors, fixed, variable or adjustable (pre-set)
8533.10.00 Electrical fixed carbon resistors, composition or film types
8533.21.00 Electrical fixed resistors, other than composition or film type carbon resistors, for a power handling capacity not exceeding 20 W
8533.29.00 Electrical fixed resistors, other than composition or film type carbon resistors, for a power handling capacity exceeding 20 W
8533.31.00 Electrical wirewound variable resistors, including rheostats and potentiometers, for a power handling capacity not exceeding 20 W
8533.40.40 Metal oxide resistors
8533.40.80 Electrical variable resistors, other than wirewound, including rheostats and potentiometers
8533.90.80 Other parts of electrical resistors, including rheostats and potentiometers, nesoi
8541.21.00 Transistors, other than photosensitive transistors, with a dissipation rating of less than 1 W
8541.29.00 Transistors, other than photosensitive transistors, with a dissipation rating of 1 W or more
8541.30.00 Thyristors, diacs and triacs, other than photosensitive devices
8541.40.20 Light-emitting diodes (LED’s)
8541.40.70 Photosensitive transistors
8541.40.80 Photosensitive semiconductor devices nesoi, optical coupled isolators
8541.40.95 Photosensitive semiconductor devices nesoi, other
8541.50.00 Semiconductor devices other than photosensitive semiconductor devices, nesoi
8541.60.00 Mounted piezoelectric crystals
8541.90.00 Parts of diodes, transistors, similar semiconductor devices, photosensitive semiconductor devices, LED’s and mounted piezoelectric crystals
8504.90.75 Printed circuit assemblies of electrical transformers, static converters and inductors, nesoi
8504.90.96 Parts (other than printed circuit assemblies) of electrical transformers, static converters and inductors
8536.50.90 Switches nesoi, for switching or making connections to or in electrical circuits, for a voltage not exceeding 1,000 V
8536.69.40 Connectors: coaxial, cylindrical multicontact, rack and panel, printed circuit, ribbon or flat cable, for a voltage not exceeding 1,000 V
8544.49.30 Insulated electric conductors nesoi, of copper, for a voltage not exceeding 1,000 V, not fitted with connectors
8544.49.90 Insulated electric conductors nesoi, not of copper, for a voltage not exceeding 1,000 V, not fitted with connectors
8544.60.20 Insulated electric conductors nesoi, for a voltage exceeding 1,000 V, fitted with connectors
8544.60.40 Insulated electric conductors nesoi, of copper, for a voltage exceeding 1,000 V, not fitted with connectors

Parts to fix your phone if it breaks:

8537.10.80 Touch screens without display capabilities for incorporation in apparatus having a display
9033.00.30 Touch screens without display capabilities for incorporation in apparatus having a display
9013.80.70 Liquid crystal and other optical flat panel displays other than for articles of heading 8528, nesoi
9033.00.20 LEDs for backlighting of LCDs
8504.90.65 Printed circuit assemblies of the goods of subheading 8504.40 or 8504.50 for telecommunication apparatus

Power supplies:

9032.89.60 Automatic regulating or controlling instruments and apparatus, nesoi
9032.90.21 Parts and accessories of automatic voltage and voltage-current regulators designed for use in a 6, 12, or 24 V system, nesoi
9032.90.41 Parts and accessories of automatic voltage and voltage-current regulators, not designed for use in a 6, 12, or 24 V system, nesoi
9032.90.61 Parts and accessories for automatic regulating or controlling instruments and apparatus, nesoi
8504.90.41 Parts of power supplies (other than printed circuit assemblies) for automatic data processing machines or units thereof of heading 8471

When More is Less: China’s Perception of the iPhone X “Notch”

Sunday, February 11th, 2018

I recently saw a Forbes article citing rumors that the iPhone X is being cancelled this summer. Assuming the article is correct, it claims that a “lack of interest in China” is the main reason for the relatively early cancellation of production. They’re hoping that 6.1″ and 6.5″ versions of their phone with a less pronounced Face ID notch would excite Chinese customers.

The notion of a “less pronounced” Face ID notch is what got me — Apple embracing the notch as iconic, and worth carrying forward to future models, rather than simply making the top bezel a bit larger and eliminating the notch altogether. Historically, Apple has taken a “less is more” strategy, meticulously eliminating even the tiniest design facets: replacing radii with splines, polishing off injection mold parting lines, even eliminating the headphone jack. Putting a notch on the iPhone feels a bit like watching a woman painstakingly apply face whitening cream day after day to remove tiny blemishes, and then don a red clown nose.

Like the red clown nose, the problem with pushing the notch is that anyone can put one on, should they decide it’s a feature they want to copy. Xobs recently showed me an app on his Xiaomi Mix 2 that does exactly that. Below is what his Xiaomi Mix 2 looks like normally.

It’s got a screen that goes right up to the top bezel, without a notch.

Interestingly, there’s an app you can run called “X out of 10” that simply draws in the notch (including subtle details like a simulated camera lens). Here’s the app in the off state:

And now in the on state:

Once activated and given permission to draw over other apps, Xiaomi Mix 2 users can don the red clown nose and experience the full glory of the iconic Apple notch all the time:

This glass-half-empty situation is a parable for design leadership versus market perception: if a market previously lacked a smartphone with a minimal top bezel, the notch is perceived as “How innovative! I’ve got extra pixels to the left and right of my earpiece/camera assembly!”. But once a market has seen a smartphone with minimal top bezel, the notch turns into “Hey where did my pixels go? What’s this notch doing here?”. It’s a case where the additional design feature is seen as a loss of function, not a gain.

Thus it will be interesting to see if Apple’s bet to introduce a phone with a larger screen that can compete head to head in China against the likes of the Xiaomi Mix 2’s 6″ screen will pay out, especially if Apple retains the notch.

Of course, as the design space for phones becomes more and more crowded, Apple’s room to maneuver becomes increasingly limited. The minimalist design space is winner-takes-all: the first company to elegantly remove a design facet wins the minimalism race, and now that Xiaomi has planted a flag in the bezel-less top space, it may be that Apple has no option but to sport the top-notch, or run the risk of being seen as copying a Chinese company’s design language.

Edit (added Feb 12, 17:43 SGT):

Several comments have been made about the iPhone X still having a greater amount of screen real estate than the Xiaomi Mix 2.

To clarify, the key point of the article isn’t about comparing active area. It’s about running out of options to place a sensor cluster, because the smartphone design space has gotten a lot more competitive. To spell it out explicitly, there are three main ways this can play out:

    1) Apple can’t hide a camera underneath the display, and so there always has to be a “dark area” that’s an affordance for the camera (and more significantly, the multitude of sensors that comprise FaceID).
    2) Apple (or perhaps someone else!) figures out how to hide a camera under the display and creates a true bezel-to-bezel phone.
    3) Apple convinces us all that the notch is truly iconic and it’s hailed as one of the greatest design innovations of this decade (hey, they did it for the headphone jack…).

In the case of 1 (Apple can’t hide the sensor cluster), these are their options:

    (a) Continue to push the top notch as iconic – status quo
    (b) Lose the notch by increasing top bezel area for sensor cluster — that’s “taking a step backward” – so not really an option
    (c) Move sensor cluster to the bottom, with no notch. This is copying the Xiaomi Mix 2 almost exactly – so not an option
    (d) Continue to push the notch as iconic, but put it on the bottom. Risks the top-half of the phone looking too much like a Xiaomi Mix 2 – so probably not an option

So in the race for minimalism, because Xiaomi has “claimed” the minimal bezel top-half design space, Apple has far fewer options for backing out of the notch, should it be perceived by the market as a loss of real estate, rather than a gain. But this is the world Apple has created for themselves, by patenting and litigating over the rounded rectangle as a phone design.

In the case of 2 (Apple figures out how to hide all the sensors), Apple can really win the minimalist design space if they can do it without reducing functionality. However, if they could have done this, I think they would have done it for the X. They certainly have the cash to throw the equivalent budget of SpaceX’s Falcon rocket program into eliminating that notch. Indeed, perhaps in a year or two Apple will come out with some crazy fiber optic wave guide assembly with holographic lenses to wrap light around the bezel into a sensor assembly stashed in the body of the phone. I wouldn’t put it beyond them.

But until then, it seems Apple is looking at option (1) for the next generation at least, and the point of this article is that the competition has robbed Apple of at least two options elegantly to back out of the notch and create a phone with greater appeal to markets like China.

Spectre/Meltdown Pits Transparency Against Liability: Which is More Important to You?

Friday, February 2nd, 2018

There is a lot of righteous anger directed toward Intel over CPU bugs that were revealed by Spectre/Meltdown. I agree that things could have been handled better, particularly with regards to transparency and the sharing of information among the relevant user communities that could have worked together to deploy effective patches in a timely fashion. People also aren’t wrong that consumer protection laws obligate manufacturers to honor warranties, particularly when a product is not fit for use as represented, if it contains defective material or workmanship, or fails to meet regulatory compliance.

However, as an open source hardware optimist, and someone who someday aspires to see more open source silicon on the market, I want to highlight that demanding Intel return, exchange, or offer rebates on CPUs purchased within a reasonable warranty period is entirely at odds with demands that Intel act with greater transparency in sharing bugs and source code.

Transparency is Easy When There’s No Penalty for Bugs

It’s taken as motherhood and apple pie in the open source software community that transparency leads to better products. The more eyes staring at a code base, the more bugs that can be found and patched. However, a crucial difference between open source software and hardware is that open source software carries absolutely no warranty. Even the most minimal, stripped down OSS licenses stipulate that contributors carry no liability. For example, the BSD 2-clause license has 189 words, of which 116 (60%) are dedicated to a “no warranty” clause – and all in caps, in case you weren’t paying attention. The no-warranty clause is so core to any open source license it doesn’t even count as a clause in the 2-clause license.

Of course contributors have no liability: this lack of liability is fundamental to open source. If people could sue you for some crappy code you you pushed to github years ago, why would you share anything? Github would be a ticking time bomb of financial ruin for every developer.

It’s also not about code being easier to patch than hardware. The point is that you don’t have to patch your code, even if you could. Someone can file a bug against you, and you have the legal right to ignore it. And if your code library happens to contain an overflow bug that results in a house catching fire, you walk away scot-free because your code came with no warranty of fitness for any purpose whatsoever.

Oohh, Shiny and New!

Presented a bin of apples, most will pick a blemish-free fruit from the bushel before heading to the check-out counter. Despite the knowing the reality of nature – that every fruit must grow from a blossom under varying conditions and hardships – we believe our hard-earned money should only go toward the most perfect of the lot. This feeling is so common sense that it’s codified in the form of consumer protection laws and compulsory warranties.

This psychology extends beyond obvious blemishes, to defects that have no impact on function. Suppose you’re on the market to buy a one-slot toaster. You’re offered two options: a one-slot toaster, and a two-slot toaster but with the left slot permanently and safely disabled. Both are exactly the same price. Which one do you buy?

Most people would buy the toaster with one slot, even though the net function might be identical to the two-slot version where one slot is disabled. In fact, you’d probably be infuriated and demand your money back if you bought the one-slot toaster, but opened the box to find a two-slot toaster with one slot disabled. We don’t like the idea of being sold goods that have anything wrong with them, even if the broken piece is irrelevant to performance of the device. It’s perceived as evidence of shoddy workmanship and quality control issues.

News Flash: Complex Systems are Buggy!

Hold your breath – I’d wager that every computer you’ve bought in the past decade has broken parts inside of them, almost exactly like the two-slot toaster with one slot permanently disabled. There’s the set of features that were intended to be in your chips – and there’s the subset of series of features that finally shipped. What happened to the features that weren’t shipped? Surely, they did a final pass on the chip to remove all that “dead silicon”.

Nope – most of the time those partially or non-functional units are simply disabled. This ranges from blocks of cache RAM, to whole CPU cores, to various hardware peripherals. Patching a complex chip design can cost millions of dollars and takes weeks or even months, so no company can afford to do a final “clean-up” pass to create a “perfect” design. To wit, manufacturers never misrepresent the product to consumers – if half the cache was available, the spec sheet would simply report the cache size as 128kB instead of 256kB. But surely some customers would have complained bitterly if they knew of the defect sold to them.

Despite being chock full of bugs, vendors of desktop CPUs or mobile phone System on Chips (SoCs) rarely disclose these bugs to users – and those that do disclose almost always disclose a limited list of public bugs, backed by an NDA-only list of all the bugs. The top two reasons cited for keeping chip specs secret are competitive advantage and liability, and I suspect in reality, it’s the latter that drives the secrecy, because the crappier the chipset, the more likely the specs are under NDA. Chip vendors are deathly afraid users will find inconsistencies between the chip’s actual performance and the published specs, thus triggering a recall event. This fear may seem more rational if you consider the magnitude of Intel’s FDIV bug recall ($475 million in 1994).


This is a pretty typical list of SoC bugs, known as “errata”. If your SoC’s errata is much shorter than this, it’s more likely due to bugs not being disclosed than there actually being less bugs.

If you Want Messages, Stop Shooting the Messengers

Highly esteemed and enlightened colleagues of mine are strongly of the opinion that Intel should reimburse end users for bugs found in their silicon; yet in the same breath, they complain that Intel has not been transparent enough. The point that has become clear to me is that consumers, even open-source activists, are very sensitive to imperfections, however minor. They demand a “perfect” machine; if they spend $500 on a computer, every part inside better damn well be perfect. And so starts the vicious cycle of hardware manufacturers hiding all sorts of blemishes and shortcomings behind various NDAs, enabling them to bill their goods as perfect for use.

You can’t have it both ways: the whole point of transparency is to enable peer review, so you can find and fix bugs more quickly. But if every time a bug is found, a manufacturer had to hand $50 to every user of their product as a concession for the bug, they would quickly go out of business. This partially answers the question why we don’t see open hardware much beyond simple breakout boards and embedded controllers: it’s far too risky from a liability standpoint to openly share the documentation for complex systems under these circumstances.

To simply say, “but hardware manufacturers should ship perfect products because they are taking my money, and my code can be buggy because it’s free of charge” – is naïve. A modern OS has tens of millions of lines of code, yet it benefits from the fact that every line of code can be replicated perfectly. Contrast to a modern CPU with billions of transistors, each with slightly different electrical characteristics. We should all be more surprised that it took so long for a major hardware bug to be found, than the fact that one was ever found.

Complex systems have bugs. Any system with primitives measured in the millions or billions – be it lines of code, rivets, or transistors – is going to have subtle, if not blatant, flaws. Systems simple enough to formally verify are typically too simple to handle real-world tasks, so engineers must rely on heuristics like design rules and lots and lots of hand-written tests.

There will be bugs.

Realities of the Open Hardware Business

About a year ago, I had a heated debate with a SiFive founder about how open they can get about their documentation. SiFive markets the RISC-V CPU, billed as an “open source CPU”, and many open source enthusiasts got excited about the prospect of a fully-open SoC that could finally eliminate proprietary blobs from the boot chain and ultimately through the same process of peer review found in the open source software world, yield a more secure, trustable hardware environment.

However, even one of their most ardent open-source advocates pushed back quite hard when I suggested they should share their pre-boot code. By pre-boot code, I’m not talking about the little ROM blob that gets run after reset to set up your peripherals so you can pull your bootloader from SD card or SSD. That part was a no-brainer to share. I’m talking about the code that gets run before the architecturally guaranteed “reset vector”. A number of software developers (and alarmingly, some security experts) believe that the life of a CPU begins at the reset vector. In fact, there’s often a significant body of code that gets executed on a CPU to set things up to meet the architectural guarantees of a hard reset – bringing all the registers to their reset state, tuning clock generators, gating peripherals, and so forth. Critically, chip makers heavily rely upon this pre-boot code to also patch all kinds of embarrassing silicon bugs, and to enforce binning rules.

The gentleman with whom I was debating the disclosure of pre-boot code adamantly held that it was not commercially viable to share the pre-boot code. I didn’t understand his point until I witnessed open-source activists en masse demanding their pound of flesh for Intel’s mistakes.

As engineers, we should know better: no complex system is perfect. We’ve all shipped bugs, yet when it comes to buying our own hardware, we individually convince ourselves that perfection is a reasonable standard.

The Choice: Truthful Mistakes or Fake Perfection?

The open source community could use the Spectre/Meltdown crisis as an opportunity to reform the status quo. Instead of suing Intel for money, what if we sue Intel for documentation? If documentation and transparency have real value, then this is a chance to finally put that value in economic terms that Intel shareholders can understand. I propose a bargain somewhere along these lines: if Intel releases comprehensive microarchitectural hardware design specifications, microcode, firmware, and all software source code (e.g. for AMT/ME) so that the community can band together to hammer out any other security bugs hiding in their hardware, then Intel is absolved of any payouts related to the Spectre/Meltdown exploits.

This also sets a healthy precedent for open hardware. In broader terms, my proposed open hardware bargain is thus: Here’s the design source for my hardware product. By purchasing my product, you’ve warranted that you’ve reviewed the available design source and decided the open source elements, as-is, are fit for your application. So long as I deliver a product consistent with the design source, I’ve met my hardware warranty obligation on the open source elements.

In other words, the open-source bargain for hardware needs to be a two-way street. The bargain I set forth above:

  • Rewards transparency with indemnity against yet-to-be-discovered bugs in the design source
  • Burdens any residual proprietary elements with the full liability of fitness for purpose
  • Simultaneously conserves a guarantee that a product is free from defects in materials and workmanship in either case

The beauty of this bargain is it gives a real economic benefit to transparency, which is exactly the kind of wedge needed to drive closed-source silicon vendors to finally share their full design documentation, with little reduction of consumer protection.

So, if we really desire a more transparent, open world in hardware: give hardware makers big and small the option to settle warranty disputes for documentation instead of cash.

Author’s Addendum (added Feb 2 14:47 SGT)
This post has 2 aspects to it:

The first is whether hardware makers will accept the offer to provide documentation in lieu of liability.

The second, and perhaps more significant, is whether you would make the offer for design documentation in lieu of design liability in the first place. It’s important that companies who choose transparency be given a measurable economic advantage over those who choose obscurity. In order for the vicious cycle of proprietary hardware to be broken, both consumer and producer have to express a willingness to value openness.

A Clash of Cultures

Wednesday, November 8th, 2017

There’s an Internet controversy going on between Dale Dougherty, the CEO of Maker Media and Naomi Wu (@realsexycyborg), a Chinese Maker and Internet personality. Briefly, Dale Doughtery tweeted a single line questioning Naomi Wu’s authenticity, which is destroying Naomi’s reputation and livelihood in China.

In short, I am in support of Naomi Wu. Rather than let the Internet speculate on why, I am sharing my perspectives on the situation preemptively.

As with most Internet controversies, it’s messy and emotional. I will try my best to outline the biases and issues I have observed. Of course, everyone has their perspective; you don’t have to agree with mine. And I suspect many of my core audience will dislike and disagree with this post. However, the beginning of healing starts with sharing and listening. I will share, and I respectfully request that readers read the entire content of this post before attacking any individual point out of context.

The key forces I see at play are:

  1. Prototype Bias – how assumptions based on stereotypes influence the way we think and feel
  2. Idol Effect – the tendency to assign exaggerated capabilities and inflated expectations upon celebrities
  3. Power Asymmetry – those with more power have more influence, and should be held to a higher standard of accountability
  4. Guanxi Bias – the tendency to give foreign faces more credibility than local faces in China

All these forces came together in a perfect storm this past week.

1. Prototype Bias

If someone asked you to draw a picture of an engineer, who would you draw? As you draw the figure, the gender assigned is a reflection of your mental prototype of an engineer – your own prototype bias. Most will draw a male figure. Society is biased to assign high-level intellectual ability to males, and this bias starts at a young age. Situations that don’t fit into your prototypes can feel threatening; studies have shown that men defend their standing by undermining the success of women in STEM initiatives.

The bias is real and pervasive. For example, my co-founder in Chibitronics, Jie Qi, is female. The company is founded on technology that is a direct result of her MIT Media Lab PhD dissertation. She is the inventor of paper electronics. I am a supporting actor in her show. Despite laying this fact out repeatedly, she still receives comments and innuendo implying that I am the inventor or more influential than I really am in the development process.

Any engineer who observes a bias in a system and chooses not to pro-actively correct for it is either a bad engineer or they stand to benefit from the bias. So much of engineering is about compensating, trimming, and equalizing imperfections out of real systems: wrap a feedback loop around it, and force the error function to zero.

So when Jie and I stand on stage together, prototype bias causes people to assume I’m the one who invented the technology. Given that I’m aware of the bias, does it make sense to give us equal time on the stage? No – that would be like knowing there is uneven loss in a channel and then being surprised when certain frequency bands are suppressed by the time it hits the receivers. So, I make a conscious and deliberate effort to showcase her contributions and to ensure her voice is the first and last voice you hear.

Naomi Wu (pictured below) likely challenges your prototypical ideal of an engineer. I imagine many people feel a cognitive dissonance juxtaposing the label “engineer” or “Maker” with her appearance. The strength of that dissonant feeling is proportional to the amount of prototype bias you have.

I’ve been fortunate to experience breaking my own prototypical notions that associate certain dress norms with intelligence. I’m a regular at Burning Man, and my theme camp is dominated by scientists and engineers. I’ve discussed injection molding with men in pink tutus and learned about plasmonics from half-naked women. It’s not a big leap for me to accept Naomi as a Maker. I’m glad she’s challenging these biases. I do my best engineering when sitting half-naked at my desk. I find shirts and pants to be uncomfortable. I don’t have the strength to challenge these social norms, and secretly, I’m glad someone is.

Unfortunately, prototype bias is only the first challenge confronted in this situation.

2. Idol Effect

The Idol Effect is the tendency to assign exaggerated capabilities to public figures and celebrities. The adage “never meet your childhood hero” is a corollary of the Idol Effect – people have inflated expectations about what celebrities can do, so it’s often disappointing when you find out they are humans just like us.

One result of the Idol Effect is that people feel justified taking pot shots at public figures for their shortcomings. For example, I have had the great privilege of working with Edward Snowden. One of my favorite things about working with him is that he is humble and quick to correct misconceptions about his personal abilities. Because of his self-awareness of his limitations, it’s easier for me to trust his assertions, and he’s also a fast learner because he’s not afraid to ask questions. Notably, he’s never claimed to be a genius, so I’m always taken aback when intelligent people pull me aside and whisper in my ear, “You know, I hear Ed’s a n00b. He’s just using you.” Somehow, because of Ed’s worldwide level of fame that’s strongly associated with security technology, people assume he should be a genius level crypto-hacker and are quick to point out that he’s not. Really? Ed is risking his life because he believes in something. I admire his dedication to the cause, and I enjoy working with him because he’s got good ideas, a good heart, and he’s fun to be with.

Because I also have a public profile, the Idol Effect impacts me too. I’m bad at math, can’t tie knots, a mediocre programmer…the list goes on. If there’s firmware in a product I’ve touched, it’s likely to have been written by Sean ‘xobs’ Cross, not me. If there’s analytics or informatics involved, it’s likely my partner wrote the analysis scripts. She also edits all my blog posts (including this one) and has helped me craft my most viral tweets – because she’s a genius at informatics, she can run analyses on how to target key words and pick times of day to get maximum impact. The fact that I have a team of people helping me polish my work makes me look better than I really am, and people tend to assign capabilities to me that I don’t really have. Does this mean I am a front, fraud or a persona?

I imagine Naomi is a victim of Idol Effect too. Similar to Snowden, one of the reasons I’ve enjoyed interacting with Naomi is that she’s been quick to correct misconceptions about her abilities, she’s not afraid to ask for help, and she’s a quick learner. Though many may disapprove of her rhetoric on Twitter, please keep in mind English is her second language — her sole cultural context in which she learned English was via the Internet by reading social media and chat rooms.

Based on the rumors I’ve read, it seems fans and observers have inflated expectations for her abilities, and because of uncorrected prototype bias, she faces extra scrutiny to prove her abilities. Somehow the fact that she almost cuts her finger using a scraper to remove a 3D print is “evidence” that she’s not a Maker. If that’s true, I’m not a Maker either. I always have trouble releasing 3D prints from print stages. They’ve routinely popped off and flown across the room, and I’ve almost cut my fingers plenty of times with the scraper. But I still keep on trying and learning – that’s the point. And then there’s the suggestion that because a man holds the camera, he’s feeding her lines.

When a man harnesses the efforts of a team, they call him a CEO and give him a bonus. But when a woman harnesses the efforts of a team, she gets accused of being a persona and a front. This is uncorrected Prototype Bias meeting unrealistic expectations due to the Idol Effect.

The story might end there, but things recently got a whole lot worse…

3. Power Asymmetry

“With great power comes great responsibilities.”
-from Spider Man

Power is not distributed evenly in the world. That’s a fact of life. Not acknowledging the role power plays leads to systemic abuse, like those documented in the Caldbeck or Weinstein scandals.

Editors and journalists – those with direct control over what gets circulated in the media – have a lot of power. Their thoughts and opinions can reach and influence a massive population very quickly. Rumors are just rumors until media outlets breathe life into them, at which point they become an incurable cancer on someone’s career. Editors and journalists must be mindful of the power they wield and held accountable for when it is mis-used.

As CEO of Maker Media and head of an influential media outlet, especially among the DIY community, Dale Dougherty wields substantial power. So a tweet promulgating the idea that Naomi might be a persona or a fake does not land lightly. In the post-truth era, it’s especially incumbent upon traditional media to double-check rumors before citing them in any context.

What is personally disappointing is that Dale reached out to me on November 2nd with an email asking what I thought about an anonymous post that accused Naomi of being a fake. I vouched for Naomi as a real person and as a budding Maker; I wrote back to Dale that “I take the approach of interacting with her like any other enthusiastic, curious Maker and the resulting interactions have been positive. She’s a fast learner.”

Yet Dale decided to take an anonymous poster’s opinion over mine (despite a long working relationship with Make), and a few days later on November 5th he tweeted a link to the post suggesting Naomi could be a fake or a fraud, despite having evidence of the contrary.

So now Naomi, already facing prototype bias and idol-effect expectations, gets a big media personality with substantial power propagating rumors that she is a fake and a fraud.

But wait, it gets worse because Naomi is in China!

4. Guanxi Bias

In China, guanxi (关系) is everything. Public reputation is extremely hard to build, and quick to lose. Faking and cloning is a real problem, but it’s important to not lose sight of the fact that there are good, hard-working people in China as well. So how do the Chinese locals figure out who to trust? Guanxi is a major mechanism used inside China to sort the good from the bad – it’s a social network of credible people vouching for each other.

For better or for worse, the Chinese feel that Western faces and brands are more credible. The endorsement of a famous Western brand carries a lot of weight; for example Leonardo DiCaprio is the brand ambassador for BYD (a large Chinese car maker).

Maker Media has a massive reputation in China. From glitzy Maker Faires to the Communist party’s endorsement of Maker-ed and Maker spaces as a national objective, an association or the lack thereof with Maker Media can make or break a reputation. This is no exception for Naomi. Her uniqueness as a Maker combined with her talent at marketing has enabled her to do product reviews and endorsements as source of income.

However, for several years she’s been excluded from the Shenzhen Maker Faire lineup, even in events that she should have been a shoo-in for her: wearables, Maker fashion shows, 3D printing. Despite this lack of endorsement, she’s built her own social media follower base both inside and outside of China, and built a brand around herself.

Unfortunately, when the CEO of Maker Media, a white male leader of an established American brand, suggested Naomi was a potential fake, the Internet inside China exploded on her. Sponsors cancelled engagements with her. Followers turned into trolls. She can’t be seen publicly with men (because others will say the males are the real Maker, see “prototype bias”), and as a result faces a greater threat of physical violence.

A single innuendo, amplified by Power Asymmetry and Guanxi Bias, on top of Idol Effect meshed against Prototype Bias, has destroyed everything a Maker has worked so hard to build over the past few years.

If someone spread lies about you and destroyed your livelihood – what would you do? Everyone would react a little differently, but make no mistake: at this point she’s got nothing left to lose, and she’s very angry.

Reflection

Although Dale had issued a public apology about the rumors, the apology fixes her reputation as much as saying “sorry” repairs a vase smashed on the floor.

Image: Mindy Georges CC BY-NC

At this point you might ask — why would Dale want to slander Naomi?

I don’t know the background, but prior to Dale’s tweet, Naomi had aggressively dogged Dale and Make about Make’s lack of representation of women. Others have noted that Maker Media has a prototype bias toward white males. Watch this analysis by Leah Buechley, a former MIT Media Lab Professor:

Dale could have recognized and addressed this core issue of a lack of diversity. Instead, Dale elected to endorse unsubstantiated claims and destroy a young female Maker’s reputation and career.

Naomi has a long, uphill road ahead of her. On the other hand, I’m sure Dale will do fine – he’s charismatic, affable, and powerful.

When I sit and think, how would I feel if this happened to the women closest to me? I get goosebumps – the effect would be chilling; the combination of pervasive social biases would overwhelm logic and fact. So even though I may not agree with everything Naomi says or does, I have decided that in the bigger picture, hiding in complicit silence on the sidelines is not acceptable.

We need to acknowledge that prototype bias is real; if equality is the goal, we need to be proactive in correcting it. Just because someone is famous doesn’t mean they are perfect. People with power need to be held accountable in how they wield it. And finally, cross-cultural issues are complicated and delicate. All sides need to open their eyes, ears, and hearts and realize we’re all human. Tweets may seem like harmless pricks to the skin, but we all bleed when pricked. For humanity to survive, we need to stop pricking each other lest we all bleed to death.

/me dons asbestos suit

Update: November 20, 2017
Make has issued an apology, and Naomi has accepted the apology. My sincere thanks to the effort and dedication of everyone who helped make this right.